Waveshare 4 Port USB HUB HAT Compatible with USB2.0 1.1 For Raspberry Pi Zero A+ B B+ 2 3 Model B Serial Debugging, USB…

4 Port USB HUB HAT for Raspberry Pi, USB to UART Onboard

Overview

This is a 4 port USB hub for Raspberry Pi, provides more USB capability to your Pi, what’s more, it features USB to UART converter for easy serial communication.

It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W.

Specifications

• Operating voltage: 5V
• Dimension: 65mm × 30mm
• Mounting hole size: 3.0mm

Development Resources

Wiki :www.waveshare.com/wiki/USB_HUB_HAT?Amazon

Packing List

1. USB HUB HAT x1
2. Micro USB connector x1
3. Micro USB cable x1
4. RPi screws pack (2pcs) x1

How to use

Take Raspberry Pi Zero W as an example:

1.Plug the module to the 40Pin GPIO connector on the Zero Board.

2.Plug the Micro USB connector to both the micro USB ports on the Zero W and the USB HUB HAT.

3.For serial connection: connect the “USB to UART” port to your PC with a USB cable and the LED will be turned on. Then install the  driver on your PC. Now you can access your Pi using serial connection (you should enable shell and kernel messages on the serial connection).

4.Attach USB devices to the USB1~USB4 ports and the corresponding LED will be turned on to indicate working state.

Note:

There are two micro USB ports on the USB HUB HAT. Only the “USB HUB” (but not “USB to UART”) connector is used for USB expansion.

You have to attach the USB HUB HAT to a Raspberry Pi B+/2B/3B with a USB cable although the module can be attached to a Pi Zero W with the Micro USB connector.

If you cannot access your Pi using serial connection, try to enable the serial option in “sudo raspi-config”.

Voer het modelnummer hierboven in om zeker te weten dat dit past.
4 Port USB HUB HAT for various versions of theRaspberry Pi, and the size of the board is designed to perfectly fit the Zero / Zero W
4 USB Ports, compatible with USB2.0/1.1
Onboard USB to UART, convenient for Raspberry Pi serial debugging
Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port
Tutorials and Driver and can be offered for free, contact us by email via Amazon to receive documents